Instructions - Hydro Bro
How to apply:
APPLICATION INSTRUCTIONS
Read through before you begin.
Work calmly and take one panel at a time.

❌ DO NOT APPLY TO:
– Hot surface


✔ WORKS ON:
All surfaces on vehicles and in the home
(paint, plastic, glass, metal, etc.)

Step 1 — Preparation
For best results, the surface should be:

• Clean
• Free from dirt and road film

Wash the car thoroughly and dry it.

The product can be applied to a wet surface for faster work –
but durability and effect will then be reduced.

For maximum gloss and beading, it is recommended that the paint is free from bonded contamination (e.g. with clay).

Step 2 — Application
Shake the bottle well.

Work on a surface of about 50 × 50 cm at a time.

• Spray once per panel
• Spread immediately with a microfiber cloth
• Use a second dry side / new cloth and buff lightly
until you get a mirror-like finish

Then move on to the next panel.

Step 3 — Dosage
The product is highly concentrated.

As a guideline:
• Hood: 7-8 sprays
• Door: 3-4 sprays

Too much product can cause haze.

What you can expect
Immediately after application:

• Extreme water beading
• Deeper gloss and shine
• Smooth and slippery surface
• Dirt has a harder time sticking

COMMON MISTAKES
Too much product:
Can cause streaks or haze.

Application on a warm surface:
Gives uneven results.
Work on a cool surface in the shade.

Poor wiping:
Always buff with a dry microfiber cloth immediately after application.

Correction
If you get marks due to incorrect application:

Wash the surface with shampoo or use degreaser
and apply again.

Important to understand
Do not mix the product with other protectants or chemicals.

Need help?
If anything feels uncertain - pause and contact us.
We are happy to help you.