Crystal Bro – Car Paint Protection with Mirror Shine & Scratch Filling (250ml)

Instructions – Crystal Bro
Important to understand
Crystal Bro is not a ceramic coating or a polish.

It is a self-leveling treatment that:

Optically fills scratches and swirls
Provides deeper color and high gloss
Forms a protective film over the paint/clear coat
After full curing, this film takes the wear and protects the car's original surface.

Must not be used on
Wraps / PPF
Existing protection (wax, ceramic coating, etc.)
Glass
Carbon fiber
Interior surfaces
Step 1 – Preparation (Most Important)
The surface must be:

Completely clean
Completely dry
Free from wax, oils, and residue
Wash the car thoroughly and remove any previous protection.

Poor prep work is the most common cause of poor results.

Step 2 – Right conditions
Work at 15–24°C
Avoid cold and very hot conditions
Work on a cool surface
Always start on a smaller area (e.g. a door).
Leave the hood until last once you’ve got the technique down.

Step 3 – Prepare the applicator
Saturate the applicator thoroughly
It should be completely soaked – not dry anywhere
Add more product after 2–4 passes
Step 4 – Application
Apply a generous and even layer
Work with straight strokes (not back and forth)
Use even, controlled pressure
⚠️ Important:

Go over the surface only once
If more than ~5 seconds have passed → do not go back
Do not overwork the surface
Crystal Bro should not be polished in.
It is self-leveling and should be left after application.

Step 5 – Check
Do you see streaks?

Usually too little product or uneven application
Solution:

Let the surface cure
Apply a new layer if needed
Do not rub during curing.

Step 6 – Curing (48 hours)
For at least 48 hours (may require more in colder conditions):

Keep the car completely dry
Avoid rain, moisture, and snow
Do not touch the surface during the first few days
Moisture during curing can cause white or hazy marks.

Result
After full curing, you get:

Deeper color
Increased gloss
Less visible scratches and swirls
On heavily worn paint, a second application may be needed.

Important to understand
Crystal Bro:

Restores and enhances appearance
Optically fills scratches
It:

Does not repair deep scratches
Does not work on damaged paint
How to remove Crystal Bro
If you want to remove the product:

Spray the entire surface with IPA (isopropyl alcohol), then wipe dry with a cloth
Polish away the film that has been applied over the paint/clear coat. During the first few days, a light polish is enough, but if the product has bonded well, more aggressive polishing may be required to remove the film!
Aftercare
Do not wash the car for 14 days
Avoid chemicals during this period
Important:

Avoid wiping the paint or trying to remove the product before 14 days have passed.
Depending on the environment, the product may need time to fully set.

Cold degreaser:

Use carefully
Max 5–6 minutes per wash
Common mistakes
❌ Too little product → streaks
❌ Too much pressure → uneven results and streaks
❌ Application in cold conditions → poor leveling and rainbow streaks
❌ Application in heat → the product sets too quickly and streaks
❌ Poor prep work → reduced durability
❌ Moisture during curing → white marks

Need help?
If anything feels uncertain – pause.
Contact us and we’ll help you get it right from the start.