Crystal Bro – Car Paint Protection with Mirror Shine & Scratch Filling (250ml)

How to apply:
Crystal Bro is not the same as ceramic paint protection, so read the full instructions!

APPLICATION INSTRUCTIONS
Read through before you start.
Work calmly and do one panel at a time.

❌ MUST NOT BE USED ON:
– Wrapping / PPF
– Window tint
– invisible protection (wax, ceramic paint protection, etc.)
– Glass
– Carbon fiber
And absolutely not on the interior.

Step 1 — Preparation (Most important)
The surface must be:

• Clean
• Completely dry
• Free from wax, oils, and other residues

Wash the car thoroughly.
Remove any previous protection or wax.

Poor preparation is the most common cause of poor results.

Step 2 — Application
Apply to a cool surface, avoid application in cold conditions or direct sunlight.

• Use a clean applicator / microfiber cloth
• Apply a generous and even layer
• Work with light overlapping strokes

Do not overwork the surface.
Do not go back over the same area once the product has started to set.

Let the product sit — it is self-leveling.

Step 3 — Check
Let the product settle for a short while and make sure the surface is even.

If you see streaks, it is usually due to too little product or uneven application.
Then let the surface cure and reapply if needed.

Do not rub during curing.

Step 4 — Curing (48 hours)
For at least 48 hours:

• Keep the surface completely dry
• Avoid rain, snow, and all moisture
• Avoid touching the surface
• Keep the car under cover if possible

Moisture during curing can cause white or hazy marks that may need to be polished out.

What to expect
The result is most visible after full curing.

You may notice:

• Deeper color
• Increased gloss
• Less visible swirls and light scratches

On heavily faded surfaces, a second application may be needed. That is normal.

COMMON MISTAKES
Rain or moisture during curing:
Can cause white marks.
Keep the car dry for at least 48 hours.

Application on a cold surface/environment:
Can create a rainbow-like effect after curing

Application on a hot surface:
The product sets too quickly.
Apply in the shade on a cool surface.

Too little product:
Causes streaks and an uneven result.
Use a generous layer.

Heavy pressure during application:
Can wipe the product off instead of applying it and create streaks.
Work with light, gentle strokes.

Poor preparation:
Reduces adhesion.
Clean thoroughly.

Important to understand
Crystal Bro restores faded clear coat.
It does not repair peeling clear coat, deep scratches, or structural paint damage.

Aftercare
Do not wash the car or use any chemicals during the first 14 days after application.
After that, the car can be washed as usual, but only use mild and gentle cleaning agents.

Cold degreaser should be used with caution and should not be left on for more than 5-6 minutes, otherwise it may affect the product's effectiveness and shorten durability.

Need help?
If anything feels uncertain, pause and contact us.
We’ll be happy to help.