How to apply:

APPLICATION INSTRUCTIONS

Read through before you begin.
Work calmly and methodically for best results.

❌ NOT TO BE USED ON:
– Glass
– Paint
– Leather
– Fabric
(If the product gets on these surfaces, wipe it off immediately.)

✔ INTENDED FOR:
Exterior and interior plastic and rubber parts on vehicles.

Step 1 — Preparation (Most important)

The surface must be:
• Clean
• Completely dry
• Free from dirt, oils, and previous products

Clean the plastic thoroughly and let it dry completely.
Good preparation is essential for an even result and maximum durability.

Step 2 — Application

Apply to a cool surface, avoid direct sunlight.

• Shake the bottle well
• Apply a few drops to the included applicator.
• Spread an even layer over the plastic surface
• Work with calm, overlapping strokes

The applicator should glide easily over the surface.
If it feels dry, add a few more drops.

Step 3 — Wiping off

Wait about 15 minutes.

Then gently wipe away any excess with a clean microfiber cloth.
Do not rub hard.

Step 4 — Multiple coats if needed

On heavily faded or dried-out plastic:
Apply 2–3 coats at about 5-minute intervals.

This is normal and gives a deeper and more even result.

Step 5 — Curing (12 hours)

For at least 12 hours:

• Keep the surface completely dry
• Avoid rain and washing

Longer curing time provides better durability.

What you can expect

After full curing:

• Deeper color in the plastic
• Restored original finish
• Very long-lasting protected surface
• Much less visible wear and fading

COMMON MISTAKES

Contact with water too early:
Can cause spots or an uneven surface.

Too little product:
Gives a streaky result.

Poorly cleaned surface:
Reduces adhesion.

Important to understand

Plastic Bro restores and protects the surface of the plastic.
It does not repair cracked or physically damaged plastic.

Safety & other

• Use gloves during application
• Store at room temperature
• Keep away from open flames
• Must not be mixed with wax or other products

If the product dries on glass or paint, it may need to be polished off.

Need help?

If anything feels uncertain, pause and contact us.
We’ll be happy to help.