How to apply:

APPLICATION INSTRUCTIONS

Read through before you begin.
Work calmly and methodically for best results.

❌ MUST NOT BE USED ON:
– Glass
– Paint
– Leather
– Textile
(If the product gets on these surfaces – wipe off immediately.)

✔ INTENDED FOR:
Exterior and interior plastic and rubber parts on vehicles.

Step 1 — Preparation (Most Important)

The surface must be:
• Clean
• Completely dry
• Free from dirt, oils, and previous products

Clean the plastic thoroughly and let it dry completely.
Good preparation is essential for an even result and maximum durability.

Step 2 — Application

Apply to a cool surface, avoid direct sunlight.

• Shake the bottle well
• Apply a few drops to the included applicator.
• Spread an even layer over the plastic surface
• Work with smooth, overlapping strokes

The applicator should glide easily over the surface.
If it feels dry – add a few more drops.

Step 3 — Wiping Off

Wait about 15 minutes.

Then gently wipe away any excess with a clean microfiber cloth.
Do not rub hard.

Step 4 — Multiple coats if needed

On heavily faded or dried-out plastic:
Apply 2–3 coats at intervals of about 5 minutes.

This is normal and gives a deeper and more even result.

Step 5 — Curing (12 hours)

For at least 12 hours:

• Keep the surface completely dry
• Avoid rain and washing

A longer curing time provides better durability.

What you can expect

After full curing:

• Deeper color on the plastic
• Restored original finish
• A very long-lasting protected surface
• Much less visible wear and fading

COMMON MISTAKES

Contact with water too soon:
Can cause spots or an uneven surface.

Too little product:
Gives a patchy result.

Poorly cleaned surface:
Reduces adhesion.

Important to understand

Plastic Bro restores and protects the plastic surface.
It does not repair cracked or physically damaged plastic.

Safety & other

• Use gloves during application
• Store at room temperature
• Keep away from open flames
• Do not mix with wax or other products

If the product dries on glass or paint, it may need to be polished off.

Need help?

If anything feels uncertain – pause and contact us.
We’re happy to help.